Ngwaahịa
Polyethylene Terephthalate Flat Punched Carrier Tape
Sinho na-enye ihe dị iche iche nke Flat Punched Carrier Tapes na ihe dị iche iche, gụnyere polystyrene doro anya na nke ojii, polycarbonate ojii, polyethylene terephthalate (PET), na akwụkwọ ọcha.Sinho's Polyethylene terephthalate (PET) Flat Punched Carrier Tape bụ maka ndị isi teepu na Reel na trailers maka akụkụ akụkụ akụkụ, ọ dabara na ọtụtụ SMT pick na ebe feeders.Enwere ike ịgbanye teepu a tụrụ n'elu igwe SMD dị ugbu a iji gbatịa ogologo ha wee belata mkpofu.
Polyethylene terephthalate (PET) Flat Punched Carrier Tape bụ ihe mkpuchi doro anya.A na-enye ya na ọkpụrụkpụ nke 0.3mm, 0.4mm, 0.5mm, na 0.6mm, yana nhọrọ sara mbara nke teepu obosara sitere na 4mm ruo 88mm.Nhazi nke ma ọkpụrụkpụ na ogologo dị na arịrịọ.
Nkọwa
| Ejiri polyethylene terephthalate mee ihe doro anya | A na-enye ya n'ụdị oke ọkpụrụkpụ, site na 0.30mm ruo 0.60mm | Ogo nke dị na ya sitere na 4mm ruo 88mm | ||
| Dakọtara na ụdị SMT dị iche iche ịhọrọ na ebe feeders | Ngwaahịa a na-abịa n'ogologo 400m, 500m, na 600m | Enwere ike ịnabata nha na ogologo omenala |
Obosara dị
Obosara8-24mm dị nnọọ na sprocket oghere
| SO | E | PO | DO | T | |
| / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 | |
| 12.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 16.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 24.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
Njirimara ahụkarị
| Ụdị | SINHO | |
| Agba | Kpochapụ | |
| Ihe onwunwe | Polyethylene Terephthalate (PET) mkpuchi | |
| Nhọrọ obosara gụnyere | 4mm, 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, na 88mm | |
| Ọkpụrụkpụ | gụnyere 0.3mm, 0.4mm, 0.5mm, 0.6mm, ma ọ bụ omenala ọkpụrụkpụ dị ka mkpa | |
| Ogologo | 400M, 500M, 600M, ma ọ bụ customizable ogologo mgbe arịrịọ |
Njirimara ihe
| Njirimara anụ ahụ | Usoro ule | Nkeji | Uru |
| Nnukwu ike ndọda | ASTM D-792 | g/cm3 | 1.36 |
| Ihe eji arụ ọrụ | Usoro ule | Nkeji | Uru |
| Ike tensile @Mmeri | ISO527-2 | MPA | 90 |
| Elongation tensile @Break | ISO527-2 | % | 15 |
| Ngwongwo eletriki | Usoro ule | Nkeji | Uru |
| Nguzogide elu | ASTM D-257 | Ohm/sq | / |
| Usoro ule | Nkeji | Uru | |
| Okpomọkụ agbagọ | ISO75-2/B | ℃ | 75 |
| Ngwa anya Njirimara | Usoro ule | Nkeji | Uru |
| Nbufe ọkụ | ISO-13468-1 | % | 91.1 |
Ndụ nchekwa na nchekwa
Ngwaahịa a na-edobe ogo ya otu afọ n'okpuru ọnọdụ nchekwa akwadoro: Debe ya na nkwakọ ngwaahịa mbụ ya, chekwaa n'etiti 0℃ ruo 40℃, na iru mmiri dị n'okpuru 65% RHF, ma chebe ya pụọ na ìhè anyanwụ na mmiri.
Camber
Zute ọkọlọtọ EIA-481 dị ugbu a maka camber nke na-erughị 1mm n'ogologo milimita 250.
Akụrụngwa
| Njirimara anụ ahụ maka akụrụngwa | Ịse ihe |
| Akụkọ enyochara nchekwa |
