Ngwaahịa
Ejiri teepu na-acha uhie uhie na teepu mkpuchi
Ezubere mpempe akwụkwọ na-ebu nke Sametho na teepu na Reep na ndị isi na ndị na-adọkpụ maka akụkụ ndị ọzọ na-emegharị anya, enwere ike iji ya na ndị na-azụ ahịa. Sinho na-enye otu akwụkwọ na-eji teepu nke na-eji eriri na nha dị iche iche na nke syystyrene, polyethcarbonate, doro anya polyethylene teered, na akwụkwọ ọcha. Enwere ike ịgwọ teepu a na-eme mkpọtụ nke ndị dị adị na SMD na-agbatị ogologo ma zere mkpofu.
Ihe a bu oria ojoo nke akpukpoko nke akpukpo aru nke akpukpo ahihia tubere teepu mkpuchi (Shht32 Series) ma na-enye ya n'otu n'otu. Polystyrene Puput Teep dị n'ọtụtụ ọkpụrụkpụ site na ọkpụrụkpụ dị iche iche site na 0.30mm ruo 0.60mm maka mpempe akwụkwọ obosara site na 4mm ruo 88mm. Ma obosara nke Shht 32 Times na-arụ ọrụ mkpuchi mkpuchi dabere na nha teepu na-adọrọ adọrọ.
Nkowa
| Polystyrene duziere mpempe akwụkwọ na-egbu egbu na teepu mkpuchi (Saịtị Shht32) | A na-enye teepu a na-enye ya na ọkpụrụkpụ sitere na 0.30mm ruo 0.60mm. | Na-eji teepu dị nha site na 4mm ruo 88mm | ||
| Obosara nke akara mkpuchi HSA na-adabere na teepu ntụ
| Kwesịrị ekwesị na isi akara niile | Na-enye ha n'otu n'otu |
Flat Punched Trape
| Mgwooru | Polystyrene Black |
| Ihe karịrị obosara | 8 mm, 12 mm, 16 mm, 24 mm, 32 mm, 44 mm, 56 mm, 72 mm, 82 mm |
| Ogologo | Ogologo usoro ahaziri iche na otu uzo |
Ngwongwo onwunwe
PS na-eduhie
| Njirimara anụ ahụ | Usoro nnwale | Unit | Baa uru |
| Ike mla | ASTM D-792 | g / cm3 | 1.06 |
| Ngwongwo nke mebere | Usoro nnwale | Unit | Baa uru |
| Ike TSSE | ISO527 | Anamba | 22.3 |
| Tensile ike @break | ISO527 | Anamba | 19.2 |
| Tensile elongation @break | ISO527 | % | 24 |
| Ngwongwo eletriki | Usoro nnwale | Unit | Baa uru |
| Elu iguzogide elu | ASTM D-257 | Ohm / sq | 104 ~ 6 |
| Ngwongwo ikuku | Usoro nnwale | Unit | Baa uru |
| Okpomoku di egwu | ASTM D-648 | ℃ | 62 |
| Kindling na-awụda | ASTM D-955 | % | 0.00725 |
Okpomoku na-eme ka teepu kpuchie
| Ekenkoko Propties | TipikalBaa uru | Usoro nnwale |
| Elu na-eguzosi ike (akụkụ akụkụ) | ≤1010Ω | ASTM-D257, ω |
| FisikalPropties | TipikalBaa uru | Usoro nnwale |
| Mputa | Transperent | / |
| Okpurukpu: | 0.060mm±0.00mm | ASTM-D3652 |
| Ike ọdụdọ (kg / 10mm) | Ro3 | ASTM D-3759, n / mm |
| Elongation (%) | ≥20 | ASTM D-3759,% |
| Haze (%) | <13 | Jis K6714 |
| Kpụrụ (%) | 85 | ASTMD1003 |
| Adhesion na teepu / bee | 50 grams ± 30 gram | Eia-481 |
| IHE: Ozi teknuzu na data a gosipụtara ebe a kwesịrị ịtụle onye nnọchi anya ma ọ bụ naanị ya, na Ejighi ya maka ebumnuche nkọwa. | ||
| Cmmeso Propties(Esd enweghị amines, N-octanic acid) | ||
Ndi ha aka
| Njirimara anụ ahụ maka ihe | Mpempe akwụkwọ nchekwa data |
| Osise |
